Quote:
Originally Posted by camaro daddy
Do you know if you can use a sanden compressor for the a/c or can you can you run a/c at all. Also do you know if the three bolt LS9 cam will work on a LS6. Thanks Dion
|
If you have an LS6 cam in there already you would be fine with that cam as the LS6 is actually a pretty good boost cam and the is similar to the LS9, but to answer your question the LS9 cam should work in the LS6. I believe your springs should be ok but I would still check that out.
You can run AC with this set-up and I believe there is a bracket for it as well. It may actually be the Fbody set-up as I think the AC compressor goes in the lower left when viewed from the front. Check out Brutespeed.com, Bob has a TON of the parts on his site. That is where I got all the add-on brackets from.
Thanks,
Dave