Here is another update on a major part of the Suspension. I spoke with Jake at, "Jakes Rod Shop", and he sent me some pictures of the status my subframe.
Some of the features of his subframe are:
-Subframe is powder coated black
-Howe extreme duty rebuildable ball joints
-Monoball d.o.m control arms
-Double adj shocks
-Can run a 275 mm or 285 mm Tire on the front. (10 Inch Wide Wheel, With 8 To 8.125 BS
-R & P Steering (16:1 ratio)
-Exhaust headers keep exhaust tucked up 1/4 inch above the bottom of the subframe
-Headers are 1.875 primary going to 2.25 mid and 3 inch collector (tri-y Headers)
Mine will have "Down Bars" that will tie into the Cage. A "Handle Bar" will connect these.
Jake updated me that my subframe will ship immediately.
Hope this helps a bit.
Enjoy,
Ty
__________________
Project, "EnGULFed"
1964 Gulf Liveried, Corvette, "Grand Sport"
===========================
Ty O'Neal
"She Devil" aka. Betty
1969/70 Camaro SS
427 LS3, 600
Keisler Road and Track T-56
Full size 3 link and custom roll cage
315mm tires on rear, should fit the same on front. Worked to design a more effective shape.
======================
"Chester's '65"
1965 Buick Riviera
Aiming for true PT Status with
the best available from the 70's and 80's
======================
|