Sieg,
Great pics......These REALLY help better understand the job in front of me. It looks like tunnel clearance is tight but manageable with some assistance of a light hammer or mallet and a 2x4.
Are you comfortable with the clearance you were able to achieve? It also looks like I need to remove the pems from underneath the tunnel that were inserted by the factory for bolting down the factory console as these probably take up about 1/4" or so of space.
Lastly, is your car lowered and or using half height sub-frame bushings? I'm using factory height bushings but car is lowered via suspension at about 1.5" or so.
Again, thanks for the feedback!
Larry
|