yes, you should be able to just change the ouput shaft and put the 2wd tail housing on and be good to go, then you just need a crossmember for the
4l60e and shorten the driveshaft to match.
I do think the trans has to be completely dissassembled to change the output shaft.....would be a good time to rebuild it.
__________________
Project EARTHQUAKE:
72 Nova SS, Plans have changed a little:artmorrison front subframe, and rear 3 link, pretty much stock ls1 and six speed with a single turbo for around 550hp. with a few other things mixed in.
current cruiser: "The green machine"
'70 Impala 4drht, 26K original miles, 2" drop springs and large swaybars, drives pretty good for a land yahct
and why do we modify everything...."BECAUSE STOCK SUCKS"
|