Ok. No problem.
Hotchkis or Global West coils in front, leafs in back. Or cut your coils up front and use blocks to drop the rear.
Drop out 5.3 L LS truck motor (i have over 210k on mine with no problems), ls1 or 6 intake, modify the stock tank for EFI, (the stock intake might fit under the firbird hood if you are lucky)
A set of cast wheels from Driverzinc, and you are done. If you do the work yourself you can easily fit this and a decent paint job within your budget.
The 5.3 ls motors are dirt cheap now. Just 300/500 bucks gets a good one on ebay with tbe ecm and harness.
__________________
Eric
1970 Camaro.....on the road someday!
Last edited by 70rs; 08-24-2011 at 07:32 PM.
|