View Single Post
  #3  
Old 02-25-2006, 08:41 AM
hotwheels's Avatar
hotwheels hotwheels is offline
Senior Member
 
Join Date: Nov 2004
Location: Big Wyoming
Posts: 617
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Can Both Turbos Be Fed Out Of The Same Oil Line
on my twinturbo's car, i came off of where the oil pressure sensor was, i have one line from there, to a "T" and then a line from there to each turbo.......
Quote:
The Return Can It Be Y-ed Too
no, each line need's to be atleast 5/8" hose and each need's to be set up to free drain to your oil pan.....I know it will take extra effort, but it really need's to be done this way.....
Quote:
2 In And 2 Out Or 2 In And One Out
2 in and 2 out will be alot of extra pluming........on my car, i went with 2 in, and 1 out.......so my turbo compressor side feed's in at the bottom of my intercooler and the air out, leaves the top and goes to my engine from there......For some simplicity, i would do the 2 in and 1 out......

hotwheels
__________________
1992 mustang gt twinturbo'd
1988 mustang gt bottlefed
2004 mach 1 resting in garage
1989 mustang coupe 4 cyl.
1980 mustang coupe 4 cyl.
MY MUSTANG ENTHUSIASTS SITE
Insanemustangs
Reply With Quote