Some bad news and good news. Bad news is that they dont make adapters to fit a Momo Steering wheel onto a 67 Mustang. Good news is that I will make my own bracket using the Grant hub and the adapter that I received with the momo wheel. The other good news is that I made quite a bit more progress this weekend.
1. Motor mount brackets are bolted up to engine and frame
2. Chrome monte carlo bar installed with stainless steel bolts
3. Carburetor installed
4. Radiator installed
5. Cross member is all bolted up
6. Chrome strut tower brackets installed with stainless steel bolts
7. Strut tower support brace bolts replaced with stainless steel bolts
8. Distributor cap and rotor installed. Will replace with new cap and rotor soon.
9. Fan and pulleys installed
10. Starter wire bolted up
11. Cut brackets for momo wheel to steering column.
Tonight I will finish making the adapter to fit the MOMO steering wheel and get the Momo wheel onto the car. Next weekend I will be installing the Saleen exhaust!
