View Single Post
  #6  
Old 09-12-2011, 07:03 PM
JMitch19's Avatar
JMitch19 JMitch19 is offline
Senior Member
 
Join Date: Feb 2005
Location: Caledonia,MI
Posts: 406
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by 6D9 View Post
With a decent hook will go 11.7-11.8 range with the 114 trap speed. Whats the motor combo??
It is pretty much a cam only(228/232 .588 .574 on a 112) LQ9 short block and T56. It has an LS6 intake,comp 918 springs, ported throttle body,hooker 1 3/4 headers,and 3 inch exhaust. It dyno'd at 400rwhp 380rwtq on a dynojet with the stock 10 bolt and 4.11's. It has a Moser 12 with 3.73's in it now. The Moser was ordered with 4.11's, but it came with 3.73's... I'm shifting into 4th after the 1000 foot mark and only crossing the line at 5400 rpms.

I picked up two 04-06 GTO spare wheels to use for skinny on the front and I'm looking for some cheap rear wheels to throw drag radials on. It seems a lot of the vette guys are using these GTO spares. They are a 17x4 cast aluminum 5 spoke wheel that looks pretty good and more importantly they clear most bigger brake set ups.

It was 76 and really humid here yesterday. I'm hoping with some cooler weather and some good tires it will go 11.99 or better.
__________________
Jason Mitchell

1971 Camaro 416 LT1 Project

Last edited by JMitch19; 09-12-2011 at 07:07 PM.
Reply With Quote