I honestly have no idea since I'm running a DSE frame. I run a 6.125 on a 10 inch rim. I have a feeling your backspacing is different. I'd call them and make sure those specs will work WITHOUT the tru turn. Also, what camber is needed to cut down on rubbing. You will need to limit your turning radius with a 275 vs. 245/255. I run 1.5 degrees of camber and have little concern and rubbing. As we discussed, unless you daily drive, it will take you a long time to put excessive camber wear on a tire. I wear my out well before I can fathom any type of camber wear if the toe is set within a 1/16 to 1/8.
__________________
Todd
|