Everything I've been doing so far in the rear of the car was to get everything situated so I can install a roll cage. After researching kits I found nothing fit the wagon the way I wanted. So I checked into just getting just a main hoop and building off that. I got a price from Jegs, I think it was like $45, very reasonable. What wasn't reasonable was the $99 shipping shaft, er, charge. So I decided to just build the whole thing from scratch. Because I've never done anything even remotely close to this I decided to do a mock up first before bending steel. Using PVC pipe, a few homemade brackets and some duct tape I got one put together.
Please note that my cage won't be "legal" for any serious racing venues, it's main design purpose was to add stiffness and safety without sacrificing comfort and streetability at all. Some features will be- A snug overall fit contoured to the interior. There is recessed main hoop cross bar behind the front seats so I have plenty of seat adjustability. I will also be building a camera stand off this bar. I have fairly long legs so I sat in the back seat with the mock up in the car just to make sure there was plenty of "get in" room and clearance for knees. The rearward bars make up the "cage" portion, similar to a 10 point cage turned backwards. I did this mostly because I didn't want to cut up the dash for front bars and that's probably overkill anyway. I also want to keep the versatility of the wagon's back storage area so the diagonal brace will be above the rear seat area. The rear bars will hit right after the rear wheel wells. I want to keep the stock lower half of the front door panels so I had to make the front bar fairly low to clear the armrest mold. The front bars are more for chassis stiffness than anything and are similar to a tiger cage.
With doing the PVC mockup I was able to test fit and try different options before bending and possibly wasting metal tubing. It's rough and pretty ugly, but when it was in the car it fit great and placement looked decent as I envisioned the real bar in there. The interior will be black with a splash of orange and silver accents. I plan on painting the cage silver too.
