View Single Post
  #35  
Old 11-24-2011, 08:06 AM
Vegas69's Avatar
Vegas69 Vegas69 is offline
Senior Member
 
Join Date: Dec 2006
Posts: 8,692
Thanks: 87
Thanked 215 Times in 120 Posts
Default

Quote:
Originally Posted by 69x22 View Post
If I had it to do over again, I would have went with the DSE rear suspensing. I have the same g-bar rear as Todd, 2000 miles, 1 autocross, 600 RWHP and small cracks in the same place. If you do run this set up, box it into your frame and tie it into the floor pan.
Damn, your rails must have been weak or that babies digging. The new g link is way worse in my opinion. It's missing the front cross member in the cradle that we enjoy. One thing I found after going to a 10" spring with my G Bar, you need to be careful at full extension. The design of the alston shock will allow the spring collar to fall off the shock mount with no spring tension. I safety wired my spring collar to my shock mount. This will only be needed if you go fairly low with a 10" spring. No idea on the G Link but all you need to do is jack the car up and let the rear end droop to check.

Found a photo that shows what I'm tallking about. Notice the shock collar sitting on top of the spring. This is exaggerated but there will be about .25-.375 gap depending on ride height.
__________________
Todd

Last edited by Vegas69; 11-24-2011 at 08:17 AM.
Reply With Quote