[68RS350]

Been awhile since I've posted some progress so here they are.

Built the tunnel tubes last week



Started to tack up the rear end of the car. Had to make a fixture off of the stock C5 Cradle and put it up on the weld table and transfered the jig to the frame rails.


[hr]


Got all of the mount pads for the cradle tacked up and fit the cradle on the subframe. I need to remove the rectangular tubing and round tube and get the plates cut to box in the pads. Then Ill get it tacked up in the car and get the rear suspension and drivetrain locked in place.