Quote:
Originally Posted by dead sailor
Hey Tobin, i just purchased 3rd gen f body hubs from you about a month ago. It's an 82 z28. The car has a 9 bolt rear end with the pbr calipers i believe it is an 11 inch rotor.
Unless wilwood makes a master that will bolt up to my firewall/pedals which was originally vacuum assist, then yes i will need some sort of adapter.
|
Mike, I did a little digging and found some pertinent information over on third-gen.org. It's mostly a DIY type of thing, although it looks like the name Ed Quay,Burkhart and
Smith Performance keep popping up along with a few home brew type setups to keep things interesting. I've linked to a couple of threads that caught my eye, however there are numerous others as well if you want to keep digging.
http://www.thirdgen.org/techboard/or...l?ref=esp-link
http://www.thirdgen.org/techboard/su...l?ref=esp-link
There seems to be a fair amount of misinformation about brakes in general, so take whatever you read with a grain of salt.
Tobin
KORE3