[norm86]

This was a rusty car.The corners of the package tray were rusted out so i removed the bad and made some patch panels after all was primed and seam sealed fitted the 1/4's for the last time which in all i had to have both sides on aand off atleast 30 time. I swear i got some of the worst fitting panels. After welding both1/4's in it was time for the rotisserie. I lapped section of the floor i replaced by crimping the old metal and laying the new peice in. all seams were fully welded on top flipped over and welded fully on the bottom.Both side of the orignal trunk that i use were rusted out so i made some more patch panels.