Quote:
Originally Posted by 65 347
Barry,
Here are the pics, it is hard to get in there with the motor in, but you don't use all three bolts on the frame, just the upper outer and lower bolt, the upper iner bolt gets covered. The measurement from upper and lower bolt is 2 1/4'', and the space between the two upper/outer bolts is 24'', but there is lots of adjustment.
Hopefully this helps.
Mike
|
I thought about getting these for my Maverick but am glad I didnt. Sure there is room to push the motor back to the firewall.. but no room for the bell housing (T5) to move back without lowering the motor. Lowering the motor is not much of an option for me either. Im already pretty low as it is.