[ccracin]

We are still trying to get as much done under the dash as we can before we weld the new firewall on. Next up is the steering column and mount for the brake pedal. After a lot of measuring, what iffing, we got the bracket built. I decided that I wanted to incorporated the pedal mount anf steering column mount into one piece that could be fixed to the cowl area. This is the area that the factory bracket was fastened too. Here is what we cam up with. A couple more gussets on the pedal mount and I'll get the bracket welded in. Here it is so far.







As always comments good or bad are welcome.