I built a 50 Buick sedan about 5years ago. I used the fatman kit, its based on a mustang 2, it went together very easy. I left the front sheetmetal on and removed the core support to gain enough room to install the cip, I was afraid I couldn't get the hood lined back up. For the rear suspension I made a set of truck arms that attacthed to the center of the frame right behind the trans. I also cut down a 96 Impala rear with disc brakes. The owner of the car at that time drove it about 10,000 miles without any problems. If you have anymore questions I might be able to help.
|