OK here's what was done today.
Cradle set at height and centred.
Engine and torque tube back in between the rails.
]
Checked the ride height, the lower controll arm is level. The bottom of the tyre is aligned with the chassis tables top rail, 100% correct. Dont mind where the top A arms are they are just bolted there trying to help get the tyre level. New A arm brakets being fabed now.
These pic's make me happy, im 99% sure I will not have to mod the firewall, the cab will bolt back on and clear the firewall and the torque tube. Bonus...........
Not the best reference pic but the back of the cleveland sits square to where the cab mount is from memory????
Ok tomorrow I'll add more things like an exhaust , front sway bar etc..... I'll then start fitting the front and centre crossmembers as well as the cradle brakets. The chassis will be boxed, but I'll try to keep it stock looking as best I can. It's coming up to a month since I picked the Effy up happy with the progress but I expect delays along the way like wrong parts or delayed parts. Guess thats the joy of building something there is always the unknown factor.....