Quote:
Originally Posted by Payton King
from Moser and it has been fine. Which part do you not think will not be reliable?
Not all floaters will work in our cars from the circle track world. Most have 5/8 studs and a center register that would be too long to have a center cap on your rim. There are a couple of alternatives that will work.
The two that I found to be the best was the Moser DB floater and the Speedway unit. With the Speedway unit they will re-drill the hub to run 1/2 studs instead of the 5/8's. If I remember correctly, the Speedway housing, aluminum hubs redrilled and axles was around $1600. Moser price was listed above.
Is Speed Tech working with Chicane to produce and market his floater that is in development?
|
Yes would be the short answer.
This Set up is all OEM stuff, ZR1 Corvette, so i figure it has been tested already. the packaging is super tight also no special wheels the off set should not change from a standard 2.5" ford , i will need to confirm that.