[GaryBetsy]

Thanks everyone for all of the feedback. We do appreciate it. Here is our next set of build picture updates. In this set of pictures after getting all the front end sheet metal installed and gapped out we discovered that the body line in the new AMD front fenders wasn't lining up with the door body line. It was 1/4" off. You can really see it in the picture with where the body line was drawn on and where it was suppose to be. So we cut and welded up the fender and made/adjusted the body line. Also after we removed the pinch welds we had to fabricate a new lower fender attachment set up so we fabricated our own lower fender mount. We wound up drilling up through the rocker and attaching the fender in from the bottom. Take a look at this next set of build pictures and give us some feedback.