View Single Post
  #5  
Old 02-17-2012, 11:26 AM
bret's Avatar
bret bret is offline
Supporting Vendor
 
Join Date: Jul 2006
Posts: 483
Thanks: 0
Thanked 3 Times in 3 Posts
Default

Quote:
Originally Posted by Pasquale View Post
I am going to be purchasing QA1 rear shocks for my 69 Camaro that are 17in extended and 11.625in compressed. That is a total of 5-3/8" of stroke. I am setting this car up for like a pro touring car and would like to know where the shock should be set at ride height. For example, should the shocks be set at 50/50 bump and compression? That would leave me with 2-11/16" of travel up and down.
I typically set ride height at a bit over half travel...in your case around 14.5-15".
Our 5.2" stroke shocks are just a tick shorter...11.25 compressed and 16.5 open, so you could run them around 14-14.5" at ride height. http://www.ridetech.com/store/coil-overs/
__________________
Bret Voelkel
President
RideTech
Air Ride Technologies, Inc.
Reply With Quote