[Tuske427]

Thanks, Wayne!

This weekend I was able to get some additional time on the 'cage. The weekend started out with one of the wheels breaking on my dolly- meaning I've exceeded the weight capacity of them and need to lighten the car up. So I got a little side tracked and took the engine & trans back out as I don't have to have those in right now. (After the cage build I'll be needing to install my brakes- more weight- so I can determine the rear wheel offset, which, when delivered, will tell me just how much I need to push out my qtr panels and then I can install those.) The car is now easier to move in/ out of my garage again...

I was able to add the gussets to the down tubes from the main hoop, as well as to the suspension crossmember. I also added a few bars under the door bars and a few plates to tie the car body to the cage.

I don't have a main diagonal cross brace in yet. My plan is to make this one removable, so I need to order some of those fancy "cage connector" pieces. This way I can add this in for an open track day, and save a few pounds when not needed.