[INTMD8]

I worked on the car a bit more the last couple of days. I decided I didn't like my radiator mounting and intercooler placement. The radiator mounting just looked odd to me and the intercooler blocked off most of the radiator airflow.

I made some new brackets to mount the radiator from the backside, then made some mounts to bolt the fan shroud on and also new intercooler brackets. (so both intercooler and radiator get some direct airflow).

Also punched four holes through the core support. Two 3in stubs on top for turbo inlet and two 2.75 stubs down lower for charge side piping.