This is my combination
I have a set of TEA 5.3 stage 1.5 heads, 90 mm Fast intake with 90 mm Nick Williams throttle body. Comp Cams XER profile with 230-230 on a 110 LSA .597/.598 lift. GM corvette injectors. I did keep the stock crank and used Compstar H-Beam rods and Diamond forged pistons. ARP studs on the mains and heads....rods/ pistons was for the nitrous I never ended up putting on the car.
Anyway, with 200 miles on the motor it made 425 RWHP and 385 RWTQ. Idles at 950 rpm, 11.3 static compression and runs on 93 pump gas. Guessing 500-525 hp at the motor. Got 26 mpg running 1750 rpm and 70 mph. All that is through a Ford 9 inch, a 12 bolt would make more power.
Very streetable and easy to drive.
|