2nd Chance Camaro - Mocking up the Kore3 Brakes
2012 03-20 Update - Mocking up the Kore3 Brakes
www.2ndchancecamaro.com
Good Evening all,
Time to start putting on all of the cool parts I've acquired. First to go back on were the old spindles.
Then I installed the AFCO steering box from
www.hoodpins.net .
Next to install was the Kore3 Front Brakes it is a very complete kit and simple to install.
Per the easy to follow instructions.
First cut off the ears to make room for the new brackets. I took a little off at a time remember once it's gone it's gone so don't go
crazy. Be safe take off a little at a time.
Here is what the final spindle modification looked like. The next step it to drill out two of the dust shield bolt holes and re-tap them for new
hardware.
Now you can install the Bracket, Caliper & Hub
All I need now is the correct rotor however I left it at my warehouse so for now I am going to use the rear rotor. I just wanted to see
how the brakes will look installed. I am very happy with this kit and the total install time was less then 2 hours.
More to come later this week.
Pictures hosted by
www.garagescene.net