I used Second Skin products. I have installed damplifier, Heatwave Pro (HP), and some UltraTouch heat insulator.
Take a look at this item available online only; from Home Depot.
UltraTouch 48 in. x 6 ft. Radiant Barrier ($18.96).
I ordered it and it arrived in 4 days, and you can't argue about the price.
After gathering these items up I test fit my Dual Gate shifter and console and trimmed the carpet and HP to fit around or under it. I then went looking for some closed cell foam locally and found a vendor. Before going to their shop I stopped in at a local U-Pull it to get a few parts and see if I could scavenge some padding from a few late model wrecks. The first car I walked by was a 93 Lincoln Towncar. The rear seat was removed and I found that they have a 1/4 CCF padding under the entire rear seat all the way to the rear deck. It is bonded to a layer of mass load vinyl and I was able to pull the CCF/MLV pads from 4 other similar cars. I also had a wheel barrel full of other types of padding and trunk type carpet. Total cost out the door was under $21.00.
If your looking for a CCF MLV product check out the late model Lincolns at your local yard.
|