[Tuske427]

Wow, feels like it's been forever since I've posted an update. This weekend I installed my (new to me) repro '69 T/A spoiler, installed (also new to me) some '69 Camaro Z-28 "short" steering arms (pic shows the one I had with the new, shorter one), played around with mocking up wheel sizes and installed the driver side quarter panel.

It looks like I'll be using 18x10 in front and 18x 12 in back and should have most, if not all complete suspension and steering travel. I ordered a set of Kore 3 billet hubs and will confirm final wheels measurements after installing those. I'm going to need to trim my wheel openings more to keep from hitting.

Wow, that quarter panel was a lot of work. It would have been a breeze had I just put it where GM did in '67. No, I had to be different. I had to flare it out ever so slightly to give it a more aggressive look. This resulted in a lot of adjusting , measuring, making sure the body lines look right, cutting, making patch parts, recycling what was left of my original quarter panel, blending into my custom tail panel, etc. And this was the easy side. all I had to do was make it look good. The other side will be much more difficult. I'll have to do all that again, as well as mirror the driver side. cool.

I have more plans for further customization for the wheel openings and quarter panels, too. Stay tuned.