[GaryBetsy]

Hey everyone here are a few more build updates and pictures of our cuda build. You can see a side profile shot of the back half of the car with the quarter removed of our trunk shelf covers installed. We fabricated the top edge of the quarter panel to resemble the stock style revel due to the fact AMD only makes quarters with a sail panel. Also we fabricated a drain tube out of Stainless Steel to control how the flow water drains from the convertible top. Instead of leaking down the wheel well and filling up the quarter we have redirected it to flow through the tube and right infront of the wheel well. We have the whole back half all squared up and are waiting to make our decklid hindge assembly. But in the mean time we recieved our side mount brakeing system from Kugal, our Lokar E-brake assembly, and our Vintage Air mock up system. So we fabricated all the mounting tabs. With some alterations we got everything to fit under the dash. Take a look at this new set of pictures and let us know what you think.