Quote:
Originally Posted by John510
The intake is made with high temp resin and can handle the heat at at least 30 psi. It was pressure tested at 100psi. I am unsure on the intake temperature. Waste has a 7psi spring. Don't plan on going over the 7psi since the block is stock. I figure with the cam and 7psi I should still be around 600rwhp which is enough for me. I don't really need an insane amount of hp for a street car. The down pipe should clear the steering shaft no problem.
Now I hope my Anvil fenders don't melt!
|
Excellent John! You'll be burning tires and smiling @ 600wheel + the motor will live
