Thanks, Wayne!
This week I got a little work done and was able to finish up the driver quarter. I added the quarter extension in, added material to the inner bumper structure, and trimmed and added the trunk floor extension.
I used '69 trunk floor extensions thinking they would have more material to work with. I flattened the curved area to maximize material and trimmed it to fit.
On the underside of the wheel well I ended up making a few trim pieces to fill in the gap. this gave me more area to attach to the quarter to. I also added a second wall to the inside of the fender edge for more strength (which I trimmed the recessed step away- I'll be doing this to the remaining ones also)
There is quite a gap on the inside where tail pipes once went. I won't be running my exhaust past the axle so I'm thinking of closing this area off.
|