View Single Post
  #38  
Old 05-06-2012, 01:41 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,475
Thanks: 7,715
Thanked 2,361 Times in 1,104 Posts
Default

Quote:
Originally Posted by Craig67 View Post
All signed up. Have benefitted greatly from this site. You might want to clarify to folks that the Paypal route is an automatic payment every year. It is not clear until you get the e-mail stating an auto-payment has been set-up. Not a problem, but folks should know ahead of time.
that's a good point. We set it up that way so it is automatically tracked. Otherwise, when your year ended it would automatically remove you from the supporting member group, drop your sig pic, etc.

You will get an email from Paypal prior to renewing, so anyone that didn't want to continue could decline at that point. You also have the ability to edit your subscription through Paypal and drop it now or any time you want, but you will lose the group at the end of the one year term.

Also, if it renewed and you didn't want to, we would immediately refund your donation if you wanted anyway, there is no problem with that. Just contact Scott or I. The recurring subscription just gives us the tracking and emails when it's ending or re-upping.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote