Quote:
Originally Posted by phillym5
I want to try and do a few things on the camaro with CF overlay. Any suggestions on where i can get a kit from?
thanks.
|
Are you looking for a self-stick application like a film or printing as suggested above - or was the question overlaying real carbon onto your parts ?
No real 'kits' out there - but you can easily use 2 x 2 carbon twill and some clear laminating resin to cover anything.
Properly abrade and clean the surface - laminate the carbon - after it cures - finish sand and spray on a few coats of clear.
Here’s a place in Indy where I buy as a sample for ya. You can check prices and see if it fits what you planned to spend.
www.avtcomposites.com
Good luck !
Jim