the rear spoiler was hand made out of steel and welded to the lid it,s a little longer and lays much flatter than the original. but at glance i hope most poeple will think it the stock one. as far as the eng. goes it will be a 421cu sbc with afr heads . the turbo's are from precision turbo there 70mm. the eng. isn't complete yet so thats just a mock-up block in there . the intake is a holley stealth ram that will use a sheetmetal plenum. it's a full tube chassis 2x4 rails with a c-moly cage . it has c-5 front suspension. and a fabricated 9" in the rear . it's a watts link set-up ,with both a 4-link and a 3-link. i will test both to see which works better in different situations. i'm not sure if it will use air-ride or coil-overs yet. the body is dropped over the chassis for a 4" ride hieght at the pinchwelds. and nothing hangs lower than that. it's been kinda crazy at my shop over the winter. but i'm trying to make more time for it.
|