[snappytravis]

I have my car stripped to bare metal, I am thinking about 2 coats of ppg dp expoy primer on the outside and inside floor ect of the body, I am then thinking about going with ppg k38 urethane primer, want to know If you guys think I should use slick sand product over dp epoxy block with 180 then use k38 to final finish all body imperfections if there are by then any left, I haven't used slick sand product and also see there is a another product called superbuild by evercoat, what are your thoughts on these products thanks for the advice, also do you think I should use something else on the floor of body on inside or go with the dp 90