[byndbad914]

I did a search on that model and couldn't find anything in all the posts for welding, hopefully I didn't miss one.

Not too concerned if the presets aren't perfect; I can dial the voltage and speed to get what I want, just want to see if others are finding it to be a good machine and capable of welding up a race car chassis.

I do a reasonable amount of fab work on my car like welding steel tubing, chassis tabs and other plate items 1/8" and 3/16", rarely ever see 1/4". Not needing an AC TIG for aluminum, my friend has a TIG I can borrow whenever I TIG thin aluminum (we all know thick alum = good machine with tons of power = $$), so the DC would be fine.

Does anyone out there have one of these and weld similar items? I have never MIG welded aluminum, but would get the Spoolmate 100 spool gun and go for it if others find it to be a good tool for alum up to 1/8".

I have been borrowing another friend's Lincoln 180 and that has covered all of the steel welding needs I have had thus far, so I believe this Miller to be comparable.