Quote:
Originally Posted by Rick D
So I tried searching but did not come up with an answer. With Backspacing the bigger the number the less dish you will have or is it the other way around? For example if I have a wheel with 3 1/2" backspacing the center of the wheel will be closer to back side of the hoop? Correct or am I messed up?? Well ok I'm messed up but that doesn't count  |
that would depend on the width of the wheel. Backspacing is measured by placing a straight edge across the inside lip of the wheel, across the center. Then measure from that line to the mounting pad of the wheel.