If you use the stock pedals with bracket listed above, you will also need a shorter clutch master rod available from speedtech. Old rod end is removed from 4th gen master & new one is put on in place of it & welded. Only other thing you will likely need to do if using all 4th gen hydraulics is make a pedal stop. The pedal will not go all the way to the floor, so travel will need to be limited to avoid damaging the master. I'll see if I can find the part # for the speedtech rod.
Scott
__________________
69 RS LS3/T56
68 firebird vert LS1/4L60E
67 RS LS2/T56
|