I've been busy with the job lately on some projects. Of course it's been in the triple digits in temperature also. So the work was little if any. Here are some of the latest and more photos of the car.
Getting the quarter panel dialed in. Back window set in place for a visual.
Here is a pic of the "mock shocks" I built. These will keep the wheels at ride height when on jack stands.... Or on a car dolly.
Speaking of car dollies. How about this one? This is what I was doing instead of working on the actual car. This pic is after it was test fit together to make sure it all worked. In short...17 feet of 5X5 square tubing and 88 holes drilled. You have a bolt together deal.
Sandblasted then painted
Partial assembly
Sliding it under the car
Under the car and bolted to the frame
I had to upgrade the casters. 8" cast ones to make rolling easier.
This makes a huge difference. It puts the frame 24" off the ground, allows you to remove the wheels for welding and body work, work under the car, etc.
Some cool pics of the trunk pan and under the car.
