[sleepertime]

I am in the process of working thru the trunk details and I noticed that the hinge assemblies are not spaced evenly from side to side. There is 1" difference between the drivers side and the passengers side it is causing my hinges to be at an angle to get the trunk lid to line up properly. The sail panel was replaced along with the mini tubs. The hinge brackets appear to be welded in the correct location up against the sail panel mounting point. The lid fits fairly well but just curious if any else has seen a similar issue. The sail panel is made by AMD. The passenger side of the hinge lines up with the body seam above and the drivers side is offset 1" to the passengers side.