trunk
I see the holes in the last picture that connect the piece from mini tub up to the trunk brace, I think that needs to be clamped and welded to square up the hinges, also check so it has the right height, You may need to take springs out to make it easier to move stuff around, I would measure the width of your old trunk front edge and back edge then measure new one to make sure they match, I had to cut the edge of my quarters and move in aprox 1/8 inch. Also need to remember cars are old and If it was ever hit hard on one or the other side that could cause problems also, maybe cross measure as well if need be. good luck
|