[daemon2]

Made a little progress on the fuel system today, the stock P1800 has a rubber stopper that the filler door held onto a filler pipe. It was bad for leaking fumes so I went with a new filler neck and gas cap - this cap has a push through filler so it does not have to be removed to fill the tank.





And I've completed the in tank EFI mod - this was a bit of work but its almost there. I will need to prep and paint the tank. I also went with an integrated fuel level sending unit that will put an end to the jumping fuel guage I had before.







This is the first P1800 tank to be modified for an in tank pump that I am aware of. It's missing the locking ring in this image, I still want to add in a few sumps just past the baffles inside the tank.