the upper arms are ones scott built and the lowers are stock arms that i modified. It has a 2" narrower hub face than a stock camaro. i did this by narrowing the lower arms an inch which improved the camber gain. Im running stock spindles, I have a set of ridetech spindles but found they wont work with the two inch drop because the unisteer steering arms wont clear the wheel. They are designed to work with ridetechs true turn system. Right now im running BFG 285/30/18 on an 11" wheel with 5.75" backspace. I can run up to a 315 on the front with this chassis. My current chassis will probably be up for sale in the near future if i decide to go with one of scotts new C6 subframes.
kevin miller
Last edited by millertime179; 09-04-2012 at 08:20 PM.
|