The rack appears to be working fine at this point. The air purged out of it pretty fast. However, I manuall ran the rack left and right many times while adding fluid before lowering the car to the ground.
When I apply the brake I can see the pressure lines on the booster jerk as if they are getting a surge of pressure through them, just no assist taking place.
I have only run the whole set up for a few minutes at this time, but have spent 1/2 hour or so bleeding the brakes as I had them open for a bit. I bench bled the m/c and even ran a bench bleed line on it after it was in the car to make sure there was no air in that part of the system.
|