I used the afco adjusters and 8" springs in my very first pt suspension build. they worked well.
since I had aftermarket flat bottomed lower a-arms, I put the adjusters on the bottom for ease of adjustment. my car was VERY low so I ended up trimming a little off of the bottom of the adjusters to center the collar in the adjustment range at ride. this let me fine tune up or down as needed.
__________________
69 ss/rs clone, hugger orange w/wht stripes, 406/ 6spd/12 bolt drivetrain, ridetech tripples, speedtech torque arm, sc&c arms....centerline champ 506's and 275/335 kdw's
98 trans-am...black ram air convertable....firehawk bilstein suspension.
|