Thanks for the input guys.
On a 3-link should the upper link be shorter than the lower? Is there a percentage of difference they should be? In the pic linked above could I attach the upper link to the top of the drive shaft loop and the lower links to the cross bar essentially making them all the same length.
I am also just learning/reading about the "watts" link. The 4-link above comes with a PHB so I am thinking I should just delete it and run a watts instead. It appears that the rear frame mount on the TCI kit would be in an almost perfect position given a tube was added to drop the mounting point lower.
__________________
'04 IS300 LS3/TR6060 swap in process
'89 Plymouth Colt GT - 411WHP, 2490lbs & 32mpg
'06 Magnum SRT8 - AFE S2, 3" Flowmaster catback, Diablo Predator (KIA by a drunk driver 10-25-13)
63 Nova 'Low Budget G-Machine' *SOLD*
Last edited by slow4dr; 01-14-2011 at 12:45 PM.
|