Quote:
Originally Posted by geberhard
Rene,
Are you using a prop valve or anything? Did you do ls all arond? Also did you use any spacers on the front or just flat plates to mount the caliper? Any pictures? Are the rear brakes locking when tires are lifted and spun by hand and brakes pressed?
Gui
|
yes I'm using prop valve, both master and prop valve are made for disc/drum setup. rear has stock drums. no spacers on the front, just the flat plates. the rear brakes are not locking while the front are. as far as the rear spinning while the brakes are pressed, can't try the just yet, need a helper for that.