Quote:
Originally Posted by The WidowMaker
thanks, but my mind couldnt handle this full time. all these ideas consume WAY too much time.
to start, i made a template that i could trace the outside of. cut it out, sanded the edges and rounded the corners. i then used that to make an inside template (one with a hole the size of the shape i wanted). i could have used the first one, but if the router slipped a little my piece was done. with the inside template there was no way to cut too much.
i then used those templates to cut even more templates for the inside recessed pieces. because i used a bushing system on the router that provided a little offset, i ended up with lots of templates to make it all work.
|
LOOK'N SWEEEEEEEET TIM KEEP CRANK'N BUDDY