View Single Post
  #32  
Old 11-09-2012, 04:22 PM
frojoe's Avatar
frojoe frojoe is offline
Senior Member
 
Join Date: Aug 2007
Location: Vancouver, BC
Posts: 296
Thanks: 17
Thanked 1 Time in 1 Post
Default

Ryan.. I'm not if I want to cut into the frame rails.. from a thread somewhere that I saw, there had to be significant cutting, to the point of the framerail being less than 1" thick, to fit a 335.

A stock Nova tub will hold a 275 comfortably at my ride height, likely 285 as well if the BS was increased slightly and possibly a higher ride height. From what I've read, up to 315 can fit if the wheelwell tub is widened up to the outboard side of the rear frame rails. To go wider than 315, the tire will interfere with the framerail so the framerail will have to be notched inwards and the tub widened even more so..
__________________
Joe
1972 Nova with twin 6466's and T56 Magnum in the works. Speedtech, Ridetech, Wilwoods etc. Swap thread --> http://ls1tech.com/forums/showthread.php?t=980909

Reply With Quote