It is too bad that you are in CA. I have a whirly Jig Pro that I like to sell. I have all the accessories for first gen Camaro. Mount stiffener and Camaro brackets. As for the hydraulic cylinders, then you have to buy some new ones. We used the harbor freight ones, but I think we had to replace 3 of them. Anyway, here is the company.
http://www.whirlyjig.com/ Shipping would be to much, based on the current gas prices.
http://www.whirlyjig.com/comparison_...jig_models.htm
One thing nice about the whirlyjig is that you can turn the car, and lock into place with the shure lock. So, you are not limited by the angle, so you can do 180 or 270 or what ever you want. The other Rotisseries don't seem to have this feature. For example, the photo below is locked in at that angle. You don't want to spin freely. I sell it for $1100 with all accessories. Can you buy a cheaper one? Yes. Whirly Jig is the only rotisseries that keeps the car in parallel, basically you have 2 bars for support. See the other rotisseries use a single bar for support.
