[390 S code]

Camshaft is a Comp hydraulic roller. One of Barry R's grinds .Not expecting to spin it too hard 6200 6500 and will have T&D street roller's to suit the Edelbrock heads .Aiming for 10.8 - 11.00 -1 compression . Looking at 500 plus hp still a bit of a unknown with the Tri power and how it all will work ,can you work out estimated HP ? 433 cu in , port matched the heads with the tunnel wedge ,running flat top Diamond pistons . The T&D rockers i have been told today i won't see till the end of the month .
Adv duration INT EXH

289 297
Dur @ >050 236 242

Valve lift .580 .587


Lob Sep : 112.0